1964-1970 Mustang Billet Distributor with Programmable Mapping from your cellphone or tablet

$599.00$874.95

SKU: N/A

We are currently expecting a shipping delay with this product. Please allow for shipping.

Delivery Disclaimer

Most of our inventory ships within 7 days of purchase, however, many of our parts are special orders. Please allow a minimum of 2 weeks for shipping. Some parts are made to order and require longer delivery times. If you have any questions regarding delivery times, please call: 619-401-6900

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Description

64-70 Mustang and Ford V8 Billet Distributor w/ Blue tooth Connectivity for onboard programmable mapping and security for your Classic Mustang

One of our favorite products to install around the shop, the Progression Ignition Programmable Mapping Distributor is for the do-it-yourselfer or the experienced tuner. This ignition system offers unparalleled ignition timing function right through your mobile device! Just install the distributor 10-degrees before top dead center, make your wiring connections (there’s only 3), download the app from your favorite playstore and you are ready to roll.

We’ve had numerous cars come through our shop that ran rough and had done for years, despite exhaustive tunning efforts. Adding this distributor, which allowed us to properly map the ignition timing changed both the idle and overall performance of these vehicles considerably. Like no other device we have found, this gives us cell by cell adjustability right on the fly by either adjustments made while driving or parked in the shop.

You may wonder how this can be an anti-theft device. Each distributor comes with its own unique PIN code. This enables you to turn off your ignition completely so there’s no spark. Simply activate or deactivate the distributor through your mobile device using your Blue Tooth connection, making it a fantastic anti-theft device.

Applications:

FORD SMALL BLOCK WINDSOR V8
3.6 L / 221 cu. in.
4.3 L / 260 cu. in.
4.7 L / 289 cu. in.
4.9 L / 302 cu. in. generally referred to as 5.0 L
5.8L/ 351 cu. in (351 Windsor)

FORD BIG BLOCK
6.1 L / 370 cu. in.
7.0 L / 429 cu. in.
7.5 L / 460 cu. in.

Ford FE
7.0 L / 427 cu. in.
7.0 L / 428 cu. in.

Coil requirements: Must use high output coil with primary resistance of 0.7 ohms or less

The Progression Ignition distributor is your all-in-one solution for high performance ignition. This Small Cap version is CNC machined from billet aluminum. Uses a remote mount coil.

Features

  • Ignition timing is adjusted with your smartphone or tablet using the Progression Ignition Tuner App. There are NO mechanical adjustments inside the distributor.
  • Easy to use! The app will create a custom timing table for you by entering just a few basic numbers.
  • Tune with a modern style timing table interface. Powerful editing features for expert tuners but easy enough for a novice
  • Make timing adjustments in real time with the engine running or not
  • Store as many tables as you want on the smartphone or tablet. Change tables instantly using the app.
  • Theft prevention feature prevents the engine from starting using the app.
  • Wireless Bluetooth connection
  • The internal ignition module maximizes coil current to 8 amps up to 10,000 RPM
  • Built in Rev Limiter
  • 2.5 bar MAP sensor for turbo and supercharged applications
  • Timing range of 10 degrees BTDC to 50 degrees BTDC
  • Separate tachometer output wire
  • Sealed upper ball bearing for the shaft
  • Diameter of distributor is 4 1/8” not including the mounting lugs.
  • Distributor gear is melonized. Shaft diameter is 0.467″. Compatible with flat tappet cams and roller cams.

THIS PRODUCT IS LEGAL FOR OFF ROAD USE AND NON POLLUTION CONTROLLED VEHICLES (1965 & OLDER); HOWEVER, IT HAS NOT BEEN TESTED OR APPROVED BY THE CALIFORNIA AIR RESOURCES BOARD (CARB) FOR HIGHWAY VEHICLES IN THE STATE OF CALIFORNIA. BY PURCHASING THIS PRODUCT, BUYER AGREES IT WILL NOT BE USED ON POLLUTION CONTROLLED VEHICLES IN CALIFORNIA, OR IN A STATE WITH SIMILAR EMISSIONS REGULATIONS.

Additional information

Weight 10 lbs
Dimensions 18 × 12 × 6 in
Engine

221,260,289,302, 351W, 370,429,460, FE-427,428

Cap Type

Male, Female

Ignition Coil

None, Male, Female

Race Feature

None, Launch Control/Nitrous Retard & Datalogging

Specifications

 

  • The internal ignition module maximizes coil current to 8 amps up to 10,000 RPM
  • Built in Rev Limiter
  • 2.5 bar MAP sensor for turbo and supercharged applications
  • Timing range of 10 degrees BTDC to 50 degrees BTDC
  • Separate tachometer output wire
  • Sealed upper ball bearing for the shaft
  • Diameter of distributor is 4 1/8” not including the mounting lugs.
  • Distributor gear is melonized. Shaft diameter is 0.467″. Compatible with flat tappet cams and roller cams.

Videos

Fitment

This part will fit the following types of vehicles:

  • 1964 Ford Mustang
  • 1965 Ford Mustang
  • 1966 Ford Mustang
  • 1967 Ford Mustang
  • 1968 Ford Mustang
  • 1969 Ford Mustang
  • 1970 Ford Mustang
  • 1971 Ford Mustang
  • 1972 Ford Mustang
  • 1973 Ford Mustang
  • 1968 Torino
  • 1969 Torino
  • 1970 Torino
  • 1967 Cougar
  • 1968 Cougar
  • 1969 Cougar
  • 1970 Cougar
  • 1964 Falcon
  • 1965 Falcon
  • 1966 Falcon

No FAQs available for this product at the moment.

Reviews

There are no reviews yet.

Be the first to review “1964-1970 Mustang Billet Distributor with Programmable Mapping from your cellphone or tablet”

Your email address will not be published. Required fields are marked *