1964-1967 Mustang Borgeson Power Steering Conversion Kit
This kit is for 6-Cylinder Mustangs equipped with manual steering
**This kit works for early 67 models with the non collapsible steering column**
**See Picture that shows steering column to steering box linkage to determine if you have an early 1967**
Click here if your 67 has a collapsible steering column
**If you have any questions please contact us via phone or email**
The 64-67 Mustang Borgeson Power Steering Conversion kits are a great solution for our Classic Mustangs. Borgeson’s kits have been an industry standard for decades now and are a tried and proven solution to poor performing and often leaking factory power steering systems, as well as a good upgrade to manual steering cars.
We’ve installed a number of these kits in our shop over the years and have grown fond of the performance to cost ratio as well as the straight forward installation. We believe that the Borgeson kits find a nice middle-ground in terms of cost vs performance that fill that niche for a power steering upgrade without moving to a costly power steering rack.
Included in Kit:
- Saginaw power steering pump with mounting brackets
- Power steering box
- Power steering hoses
- Steering coupler
- Replacement steering column shaft with floor mount
**Borgeson power steering boxes may not work with some headers.**
**Will NOT work with factory z-bar clutch linkage. Must use Borgeson’s z-bar if you are using the factory clutch linkage.**