HP Oil Line Shield Builder’s Kit Oil Line 5/8 Inch ID by Heatshield Products



We are currently expecting a shipping delay with this product. Please allow for shipping.

Delivery Disclaimer

Most of our inventory ships within 7 days of purchase, however, many of our parts are special orders. Please allow a minimum of 2 weeks for shipping. Some parts are made to order and require longer delivery times. I you have any questions regarding delivery times, please call: 619-401-6900

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.


HP Builder’s Kits feature a heat protective thermal sleeving capable of withstanding 1200 degrees F continuous. This nonflammable sleeve has a special weave that allows it to expand and contract over fittings. These sleeves can protect fuel lines, preventing vapor lock. They can also be used to protect wires from heat damage and allow you to hide your wiring. You get modern heat shield protection with a vintage OEM look. The 1/2 Inch sleeve is ideal for shielding most fuel lines, helping to stop vapor lock and improve performance. The smaller 7/16 Inch sleeve is great for small wire looms and brake lines. The 5/8 Inch id sleeves are ideal for protecting your oil lines from heat damage caused by being too close to the motor or exhaust. So add some heat protection and make your ride a cooler one.


  • Oil Line Shield
  • Continuous operating reflective temperature of 1100 degrees F, 2000 degrees F intermittent
  • Capable of reducing up to 60 percent of radiant heat
  • Special weave that allows it to expand and contract over fittings, terminals, etc.
  • Helps to prevent vapor lock
  • Protects wires from melting
  • Shields Oil Lines
  • Size: 5/8 inch ID x 2 or 6 Foot Roll
  • Operational Temperature: 1100 Degrees F
  • Peak Temperature (30 seconds or less): 2000 Degrees F
  • Color: Black
  • Material: Fiberglass
  • Made in the USA
  • Sold As Each

Installation Tips:

  • Slide On and Product can be placed in direct contact with heat source


  • Always wear safety glasses
  • Dust mask, gloves and long sleeves are recommended when handling this product

Additional information

Weight N/A
Dimensions N/A

2 Feet, 6 Feet


Inside Diameter: 
5/8 Inch
Operational Temperature: 
1100 Degrees F
Peak Temperature: 
2000 Degrees F
90 Day Manufacturer Defects
Builders Kit


There is no video available for this product.


No fitment information for this product.

Installation Tips

There are no installation tips available for this part. If you have any question, please call us at: ["phone"], or use our contact form.


There are no reviews yet.

Be the first to review “HP Oil Line Shield Builder’s Kit Oil Line 5/8 Inch ID by Heatshield Products”

Your email address will not be published. Required fields are marked *