HP Fire Shield Sleeve Roll in Black by Heatshield Products



We are currently expecting a shipping delay with this product. Please allow for shipping.

Delivery Disclaimer

Most of our inventory ships within 7 days of purchase, however, many of our parts are special orders. Please allow a minimum of 2 weeks for shipping. Some parts are made to order and require longer delivery times. I you have any questions regarding delivery times, please call: 619-401-6900

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.


Available in master rolls, Heatshield Products Fire Shield Sleeve provides thermal and physical protection against excessive heat with its rugged silicone covering. This fuel line heat shield tubing starts with braided fiberglass yarns in a flexible substrate, then is coated with a high-grade silicone rubber. This rugged silicone coating makes the Fire Shield Sleeve resistant to most chemicals, including hydraulic fluids, oils and fuels. The coating also makes it resistant to abrasion and fraying. You can use Fire Shield Sleeve for brake lines, fuel lines, wiring harnesses and cables, making master rolls a must-have for any hot rod and race car shop. The rugged silicone coating also makes Fire Shield Sleeve ideal for protecting welding lines and cables. This oil line heat sleeve is designed to reduce and dissipate heat, and works great in harsh environments that require thermal protection and insulation. This heat sleeve fuel line withstands 450 degrees F continuous and brief intervals of 700 degrees F, and allows for the bundling of wires, hoses and cables.


  • Continuous operating temperature of 450 degrees F, 700 degrees F intermittent
  • Silicone layer can be cleaned and protects against abrasion
  • Helps to prevent vapor lock
  • Protects wires from melting
  • Available in Multiple Sizes:
  • Operational Temperature: 450 Degrees F
  • Peak Temperature (30 seconds or less): 700 Degrees F
  • Color: Black
  • Material: Silicone/Fiberglass
  • Made in the USA
  • Sold As Each

Installation Tips:

  • Slide On and Product can be placed directly on heat source


  • Always wear safety glasses
  • Dust mask, gloves and long sleeves are recommended when handling this product

Additional information

Weight N/A
Dimensions N/A

1 inch ID, 1-1/2 inch ID, 1-1/4 inch ID, 1/2 inch ID, 3/4 inch ID, 3/8 inch ID


10 Feet, 100 Feet, 3 Feet, 50 Feet


There are no specifications details for this product



No fitment information for this product.

Installation Tips

There are no installation tips available for this part. If you have any question, please call us at: ["phone"], or use our contact form.


There are no reviews yet.

Be the first to review “HP Fire Shield Sleeve Roll in Black by Heatshield Products”

Your email address will not be published. Required fields are marked *