Hot Rod Heat Shield Sleeve (10 Feet) by Heatshield Products



We are currently expecting a shipping delay with this product. Please allow for shipping.

Delivery Disclaimer

Most of our inventory ships within 7 days of purchase, however, many of our parts are special orders. Please allow a minimum of 2 weeks for shipping. Some parts are made to order and require longer delivery times. I you have any questions regarding delivery times, please call: 619-401-6900

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to


Hot Rod Sleeve is thermal sleeving capable of withstanding 1100 degrees F continuous. This non-flammable sleeve has a special weave that allows it to expand and contract over fittings. In addition, it has that old school sleeve look with modern heat shield technology. Ideal for shielding fuel lines, helping to stop vapor lock, protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. This enables you to fit things into those tight places, and we all know custom builds have lots of tight places. Available in 10 foot and 100 foot rolls!


  • Continuous operating reflective temperature of 1100 degrees F, 2000 degrees F intermittent
  • Capable of reducing up to 60 percent of radiant heat
  • Special weave that allows it to expand and contract over fittings, terminals, etc.
  • Helps to prevent vapor lock
  • Protects wires from melting
  • Shields oil and brake lines
  • Available Sizes: 1/4″ ID,  3/8″ ID, 1/2″ ID, 3/4″ ID and 1″ ID x 10 Foot Roll
  • Operational Temperature: 1100 Degrees F
  • Peak Temperature (30 seconds or less): 2000 Degrees F
  • Color: Black
  • Material: Fiberglass
  • Made in the USA
  • Sold As Each

Installation Tips:

  • Slide On and Product can be used as a radiant heat barrier or placed directly on heat source


  • Always wear safety glasses
  • Dust mask, gloves and long sleeves are recommended when handling this product

Additional information

Weight N/A
Dimensions N/A

1 inch ID, 1/2 inch ID, 1/4 inch ID, 3/4 inch ID, 3/8 inch ID


Inside Diameter: 
1/4″ | 3/8″ | 1/2″ | 3/4″ | 1″
Operational Temperature: 
1100 Degrees F
Peak Temperature:
2000 Degrees F
90 Day Manufacturer Defects
Hot Rod Sleeve



No fitment information for this product.

Installation Tips

There are no installation tips available for this part. If you have any question, please call us at: ["phone"], or use our contact form.


There are no reviews yet.

Be the first to review “Hot Rod Heat Shield Sleeve (10 Feet) by Heatshield Products”

Your email address will not be published. Required fields are marked *